Author Topic: Breather seal  (Read 947 times)

0 Members and 1 Guest are viewing this topic.

August 21, 2016, 06:29:31 PM on

Offline Timbox2 (OP)

  • Sumatran Tiger
  • *
  • Location: South Wales, UK
  • Posts: 2125
  • Activity Meter:
    1.78%
Was gonna leave this until winter, but got bored today, so. Worse bit was removing the Touratech bars, now they are off Im gonna see if I can get them stripped and re- powder coated





Before I took the seal out there was a fair amount of oil behind the seal in the breather chamber, so looks like it was letting oil past. Found an old thread by Evil Betty where he recommended getting the new seal pressed in so will go and see my mate tomorrow and get him to do it.
2016 Tiger Sport

August 23, 2016, 02:11:12 PMReply #1 on

Offline Timbox2 (OP)

  • Sumatran Tiger
  • *
  • Location: South Wales, UK
  • Posts: 2125
  • Activity Meter:
    1.78%
Yep, thats done the trick, 100 mile or so ride round the Beacons today, pretty hot and I screamed the nuts off her then pulled the breather pipe off a couple of times, dry as a bone, no oil dripping back down the pipe :thumbsup
2016 Tiger Sport