News:

Welcome to the TigerTriple forum! Over the years we have gathered lots of great information on all things Triumph Tiger. Besides that, this is a great community that is willing to help you keep your Tiger moving. So, feel welcome! Also, try the search button for answers to your questions. If you have any questions, PM me on ghulst.

Main Menu

Clutch Cover Removal Question

Started by wah64apache, September 19, 2016, 09:08:23 PM

Previous topic - Next topic

wah64apache

Anybody found a way to get the clutch cover bolt at 3 o'clock out without messing with the starter cover/gears and the crank cover?
I was thinking of cutting and welding up a box end wrench to fit in there but if the bolt is too long then it's not gonna work.
Cheers, Frank
Cheers, Frank

benebob

Bolt is gonna be too long if I remember right.
99 Tiger 885i (Killed 12/23/12 9:52am EST by a drunk driver) 06 Tiger 955i (traded 12/23/16  12:52pm)
13 Tiger 800

wah64apache

Right you are. I pulled a couple of the others. That idea won't work. I'll let the clutch get a lot worse before I take on that Engineering SNAFU. :Topes
Cheers, Frank

benebob

Ah, replacing the clutch was easier then taking of the fuel tank to replace the air filter.  :) 
99 Tiger 885i (Killed 12/23/12 9:52am EST by a drunk driver) 06 Tiger 955i (traded 12/23/16  12:52pm)
13 Tiger 800