News:

Welcome to the TigerTriple forum! Over the years we have gathered lots of great information on all things Triumph Tiger. Besides that, this is a great community that is willing to help you keep your Tiger moving. So, feel welcome! Also, try the search button for answers to your questions. If you have any questions, PM me on ghulst.

Main Menu

Tiger Parts Cross-Reference Guide

Started by Stretch, January 14, 2008, 03:35:05 PM

Previous topic - Next topic

Advwannabe

Another shifter altenative:



MCS part no FG5
No good deed goes unpunished
02 Tigger
02 Blackbird
75 GT380
IBA #33180

Sin_Tiger

Steamer, Swing Arm Bearings

Needle Roller Bearings for the above. Part numbers and index numbers refer to Triumph parts fiche.

Section 7 - Swinging Arm
12) Bearing, Needle - 3800014-T0301 = (NTN) HK2526..x 4 off  

All other parts are genuine Triumph only.
I used to have long hair, took acid and went to hip joints. Now I long for hair, take antacid and need a new hip joint

MtheTiger

QuoteO rings for steamer Mikuni Carbs (floats)

The part numbers are 9263K121 for the small size and 9263K137 for the large at good ole WWW.mcmastercarr.com

Todays call to the stealer learned that he will charge € 54,00 for replacement carb orings :evil:  WTF!!!

Then I saw your post with part nrs. Are the ones you mention the only ones needed? If not, which ones are needed also and where can I get the right ones for civilized amounts of money?
-Only dead fish go with the flow-

97 Caspian blue

Mustang

LED BULBS[/size]

These are for Steamers .may work for the Girlies also

http://tigertriple.com/forum/viewtopic. ... highlight=

davefitzs

I just changed the ignition switch on a 94 Tiger. I used a Kawasaki 7 wire switch. Fits straight on, steering lock even works. I had to change a couple of wires to get it working. Cost 50€ on eBay which is much cheaper that the Triumph part. Just Google 736901 and you should find one on eBay.

pip 885

does anybody know if a cylinder liner off an 885 steamer will fit a 885 Girly?  :icon_scratch
1999 yellow 885i

Mustang

Part numbers are the same for 98 carbed 885 and 1999 FI engine , according to bike bandit . So I would have to say yes they are the same  :D

pip 885

thanks for the info, i`ll give it a go then. :D
1999 yellow 885i

wesseld

I just placed an order for a new chain, screw-type master link, and rear sprocket for my 2006 Tiger, and thought this info may be helpful for someone looking for the details.

EK Chain EK530SRX X 114 link (703-530SRX-114)
   $76.04
             
EK Chain EK 530SRX SLJ (SCREW ON) LINK (701-530SRX-SLJ)
   $7.18

JT SPROCKET JTR1800.46 (46 tooth) TRIUMPH 955 TIGER 05-06
   $33.64

Shipping to 85016
   $11.49

Total   $129.05

Cheers!

Don
Silver 2006 Triumph Tiger

rybes

Quote from: "Stretch"WHEELS TigerTriple members have reported that they only fit on 1999-2004 Tigers, replacing wire spoke wheels.

yep they do. ive got 2001 wire wheels on my 1994. straight swap. got better rims and stainless spokes as standard.
reiberman reiberman rides his tiger as hard as he can (sung to spiderman tune)

Colonel Nikolai

STEAMER SPARK PLUGS

Brand:           Part Number
-----------------------------
NGK:             DPR9EA-9*
ACCEL:           882
AC DELCO:        R121XLS
AUTOLITE:        4162
BOSCH:           XR4CS
CHAMPION:        RA6HC
GM:              5614066
PRESTOLITE:      12G2,12G3
-----------------------------
*This is the official plug type for the Steamer
Mostly commuting around town on the Steamer these days.

jnutiger

Just a heads up for those of you considering the use of Yamaha oil filters on their Tigers.  The filter on the left is the 5GH-13440-00 and was mentioned earlier as a replacement.  When installed on my 2006,  it hangs down below the pan about a half inch and is vulnerable to impact. The filter on the right is the 5GH-13440-20 and is a perfect fit.  Have a skid Plate?  Stick with the larger one.

2006 Tiger

tigergotcha

Quote from: "abruzzi"OIL FILTERS

Quote from: "RT"The Bosch 3300 is an exact replacement for the Triumph filter and will fit the 2006.

Purolator Pure 1 P/N PL14612    *use this on my 06
Mobil 1 P/N M1-108
WalMart SuperTech P/N ST6607
NAPA Gold P/N 1365
AC Delco P/N PF1237

I'd recommend the Purolator Pure 1.  Several sources have taken them apart and found significantly more filter area than other brands.  The stock size is: PL14612, but if you have a skid plate or don't go off road, you can get the PL14610 which is an inch longer.

There is also a ~$100 replaceable element filter, but I cant find the link right now.

Geof

2006 Girlies:
K&N 204 (with 17mm nut for easy replacement, drilled for safety wire attachment)
HIFLO HF204

jwray76

Quote from: "Stretch"Radiator Cap

The Triumph caps are prone to weakening before their time, allowing vapor and coolant to escape, resulting in an overly hot Tiger.

The Triumph caps are $19 at a dealer, IF they have one in stock.

ArizonaKid discovered that a Stant 10227 radiator cap, a replacement for 80's Toyotas (as well as 1988-91 Honda Civic), is a perfect fit for a Tiger, available at auto parts stores 'round the world.  About $7.




Edit for a new development:

Quote from: "walker"The stant 10227 (replaced by the newer 11227) is only a 13 psi cap. A good replacement might be the 11233 - it's 16 PSI, which is right at the 1.1 BAR that triumph specifies.

Same dimensions, just a different main spring.

To add...

Quote from: "flux"FYI:
This cap fits these cars:

ACURA   (1989 - 2005)
CHEVROLET   (1985 - 1988)
CHRYSLER   (1995 - 1999)
DODGE   (1995 - 1999)
EAGLE   (1995 - 1998)
FORD   (1989 - 2009)
GEO   (1989 - 1993)
HONDA   (1990 - 2007)
HYUNDAI   (1998 - 2008)
INFINITI   (1997 - 2007)
ISUZU   (1985 - 2004)
KIA   (2001 - 2008)
LEXUS   (1992 - 2007)
MAZDA   (1993 - 2008)
MERCURY   (1989 - 2001)
MITSUBISHI   (1995 - 2008)
NISSAN   (1990 - 2008)
SUBARU   (1999 - 2008)
SUZUKI   (2004 - 2008)
TOYOTA   (1994 - 2008)

Advance Auto did not carry the 11233 cap and it wasn't in the computer at all. They did have a 10233 so I brought it home and took a look and dimensions looked good. The cap is also 16 psi so the rating is correct. Put it on and seems to function well.  

UPDATE: APPEARS THAT THIS CAP MAY OPEN UP FLOW TO THE OVERFLOW TOO EARLY CAUSING BOILING OVER. GOT THE FACTORY CAP BACK ON A WHILE BACK AND CAN CONFIRM THAT THE STANT 10233 IN THE WRONG CAP. PLEASE DON'T TRY THIS UNLESS YOU LIKE BOIL OVERS!

Timbox2

BRAKE PIN PLUG.


You know, the little metal plug that screws over the pad retaining pin on the Girlies and Steamers and gets rounded out in no time.

Go to Triumph and they only sell a kit of the plug and a new pin, about £8

Go to Honda and ask for a 45203-MG3-016  £2.35,  thats better but still dear for what it is really
2016 Tiger Sport