TigerTriple.com

Other Beasts => Three Legged Tiggers => Topic started by: Mustang on October 30, 2013, 04:23:37 PM

Title: car tire for a pusher
Post by: Mustang on October 30, 2013, 04:23:37 PM
(http://i231.photobucket.com/albums/ee47/2uoykcuf/sidecar/DSC_0374_zps754a18ee.jpg)


195/45-17 Yokohama S-Drive car tire fits very nicely on a 3 spoke Trophy rim .
Bolts right on to the steamer with room to spare for the chain and swingarm.
Handles oh so nice and the mileage from the tire is in the 20-30 k range instead of only 2- 3 k with a more expensive bike tire .
Another added bonus is much better traction off road , compared to the very small contact patch a bike tire gives on the hack .
I would say it is a must do mod if you are going to have three legs.

another added bonus is without modding anything a trophy three spoke will bolt right onto the rear of a Girly (1999-2004) bike also . but not on the 05's or 06's 
Title: Re: car tire for a pusher
Post by: John Stenhouse on October 31, 2013, 11:54:39 PM
Can you do this with the car tyre?

(http://farm8.staticflickr.com/7329/10599297014_3dbc10d581.jpg) (http://www.flickr.com/photos/22387844@N05/10599297014/)
wheelie_war_wednesday_009_10302013 (http://www.flickr.com/photos/22387844@N05/10599297014/) by john.stenhouse1 (http://www.flickr.com/people/22387844@N05/), on Flickr
Title: Re: car tire for a pusher
Post by: Mustang on November 01, 2013, 12:59:18 AM
ALL DAY LONG ! :thumbsup
Title: Re: car tire for a pusher
Post by: John Stenhouse on November 02, 2013, 01:51:12 PM
Mmm, think I'm going to have to try this three legged business. Watsonian and squire are six miles away so a trip to Blockley might be planned if the weather improves.
Title: Re: car tire for a pusher
Post by: Mustang on November 02, 2013, 02:14:19 PM
Hi John

it's not for everyone .........
it seems there are two ways to go you either love it or hate it .
they go great in a straight line .
steering can be a little on the heavy side .
properly set up though and the rig corners great ............most of the time.
occasionally you will find a right hand turn (left hand for folks who ride on the other side of the road ) that she will want to just plow through to the other lane . :bug_eye
you learn how to read the road , ie if the roadbed leans into the turn as a good roadway should it is effortless to turn . flat corners or roads that lean out opposite of the turn are where things go bad for right turns (left for UK)
My tiger with the chair is pretty well set up and it's seen better than a ton on the interstates with no ill handling at all .
two lane backroads will sometimes get ya though .
and off road is certainly exiting when the terrain gets uneven . :bad

I  :love10 it haven't ridden tigger two with the 17 inch wheels in more than a year now . the sidecar gets the call every time .
Title: Re: car tire for a pusher
Post by: Sin_Tiger on November 04, 2013, 11:14:12 AM
Just checking, you put the 195/45-17 Yoko on a 5.5 rim?
Title: Re: car tire for a pusher
Post by: Mustang on November 04, 2013, 01:32:40 PM
 :nod

trophy three spoke and balanced it with dynabeads .

was a bit of a pain in the ass to get the last bit of the bead over the rim .

it's wearing like iron , shows no wear at all so far after approx. 5500 miles and I would have had two 185/50-17 bike tires go bald in the center already after the summer miles
Title: Re: car tire for a pusher
Post by: Bixxer Bob on November 04, 2013, 09:15:02 PM
Car tyres pushing a car would give around 20k I guess.  On a sidecar outfit, it should last for ever.
Title: Re: car tire for a pusher
Post by: Mustang on November 04, 2013, 11:02:53 PM
That's the plan. I have 7 bald ones front & rear sitting outside the garage from the last 15 k miles.
Now running car tires on rear and on the chair with an dedicated Avon sidecar tire on the front.
Fingers crossed.
Title: Re: car tire for a pusher
Post by: Marc on November 05, 2013, 09:10:23 AM
Quotebalanced it with dynabeads

does this also work with inner tubes?
Title: Re: car tire for a pusher
Post by: Bixxer Bob on November 05, 2013, 10:41:02 AM
Quote from: Mustang on November 04, 2013, 01:32:40 PM
:nod

was a bit of a pain in the ass to get the last bit of the bead over the rim .


https://www.facebook.com/photo.php?v=10151971877183522&set=vb.383848185058538&type=2&theater

Icelanders do it all the time.  They run pressures so low on the deep snow that tyres come off the rim.  They use this way to put the tyre back on the rim without removing the wheel.
Title: Re: car tire for a pusher
Post by: Mustang on November 05, 2013, 12:50:22 PM
Quote from: Marc on November 05, 2013, 09:10:23 AM
Quotebalanced it with dynabeads

does this also work with inner tubes?
certainly does ...........
I've got dynabeads in all my bikes tubed or tubeless , never a problem and the wheels are ALWAYS balanced .

BB,
seating the bead was not an issue on the trophy rim , the problem was getting that last bit of the tire onto the rim with the spoons .
Title: Re: car tire for a pusher
Post by: Sin_Tiger on November 05, 2013, 01:18:43 PM
I agree, big fan of dynabeads myself  :thumbsup
EhPortal 1.34 © 2024, WebDev