Has anyone tried these LEDs? Phillips 252W; 25,200 Lumens
Will they fit in the housing?
Overheat without ventilation?
Overload the circuit?
http://www.ebay.com/itm/H4-252W-25200LM-Philips-LED-Headlight-Kit-HIGH-LOW-Beam-Replace-Halogen-Xenon-US-/182500909275?hash=item2a7de6e0db:g:85AAAOSwc-tY1Hv1&vxp=mtr
So, with NO input at all, I decided to roll the dice and install these.
They fit, although tightly. I haven't ridden at night yet, so can't really compare them to stock H4's .
Due to the cooling fans, you can't use the rubber boots that were on the stock H4's.
I did wire up some other JBQ LED spots to the high beams as well, and some JBQ LED flood lights which powered through the high beam circuit, have a separate switch as well.
Quote from: VABird on April 19, 2017, 05:40:36 AM
So, with NO input at all, I decided to roll the dice and install these.
Thanks for taking the initiative... :thumbsup
I doubt if anyone on this forum has used lights with fans on them. :icon_scratch:
How do you get on with the led lights? I've used them before on a previous bike and am toying with putting them in the Tiger.
What's your thoughts on this mod?
I don't know if that auction is accurate, but 25,200 lumens? Aren't normal H4s 1000-1600 lumens?
Don't know how many lumens, but they are better than stock, and have not failed yet. So....