TigerTriple.com

Tiger Time => Girly Talk (1999 - 2006 Tigers) => Electrickery => Topic started by: sailorcolin on August 26, 2014, 06:11:24 PM

Title: Flash-To-Pass not working
Post by: sailorcolin on August 26, 2014, 06:11:24 PM
Before I take the unit apart to check the connections, is there a common problem with the Flash-to-Pass feature not working? (http://www.webbikeworld.com/t2/motofx/flash-button.jpg)
Title: Re: Flash-To-Pass not working
Post by: Bixxer Bob on August 26, 2014, 08:24:06 PM
Not heard of it before, but there's not much to go wrong.  Before you wade in,  I assume the main beam is actually working?  Just asking the idiot question because I've made the idiot mistake twice this week so far.  If you unplug the cluster at the first plug, check for continuity across the brown (number 12 pin) and red/black (pin 7) when the button is pressed.  If nothing then you need to open up the switch.  If you have continuity you need to check that you're getting 12v on the blue/black wire and that the blue/white wire has continuity from the plug to the RH headlight.

Title: Re: Flash-To-Pass not working
Post by: sailorcolin on August 26, 2014, 08:34:31 PM
Quote from: Bixxer Bob on August 26, 2014, 08:24:06 PM
Not heard of it before, but there's not much to go wrong.  Before you wade in,  I assume the main beam is actually working?  Just asking the idiot question because I've made the idiot mistake twice this week so far.  If you unplug the cluster at the first plug, check for continuity across the brown (number 12 pin) and red/black (pin 7) when the button is pressed.  If nothing then you need to open up the switch.  If you have continuity you need to check that you're getting 12v on the blue/black wire and that the blue/white wire has continuity from the plug to the RH headlight.

Thanks!
Title: Re: Flash-To-Pass not working
Post by: John Stenhouse on August 27, 2014, 12:22:05 AM
Mine don't work, can't be arsed to take it apart
Title: Re: Flash-To-Pass not working
Post by: TigerT on September 01, 2014, 05:19:08 PM
Mine's bust as well, I just flick main beam off and on
Title: Re: Flash-To-Pass not working
Post by: sailorcolin on April 01, 2015, 04:38:25 PM
Fixed it. The connections behind the button were dirty and after cleaning them it works now!
EhPortal 1.34 © 2024, WebDev