Hi all, can anyone I.D. these plugs and what they are for i recently did the fuel connector mod so i can now give her a service , and found these 3 plugs unused ?? any help would be appreciated, The bike is running good & i can't see anywhere that they might plug to , was there any optional extra's that could be fitted etc thanks
Top one is Im sure the connector that is only used on certain US models with Carbon cannister system.
Bottom 2 look like charging circuit plugs, has somebody done a sasquatch mod? Forget that, not sure now
PS: The corrugated Idle stepper hose in first picture looks to be in trouble? Plays havoc with the idle if any of those 3 hoses are split/collapsed
Pretty sure Tim was right fist time and the bottom two are the charging circuit
I have my tank off at the moment and these are where my charging circuit wires to and from the reg/rectifer unit plugs in to the bike harness, so as has been said, if these are spare then you have the mod done on your bike. (mine is a late 955i)
Thanks guys, i will check the corrugated pipe as it does tick over quite low